Airplex Retractable Tonneau Cover — Toyota Tundra
Interlocking aluminum slats retract into a low-profile canister at the front of the Toyota Tundra’s 6.5 ft bed, giving you full, unobstructed bed access without ever removing the cover. Mounts with bed rail clamps — no drilling required.
Shop This CoverOverview
This retractable cover is built specifically for the Toyota Tundra’s 6.5 ft bed — a hard-slat alternative to a folding or roll-up cover for owners who want both security and full bed access without a tradeoff. Interlocking extruded-aluminum slats connect on a flexible spine that slides along side rails into a compact canister mounted just behind the cab.
Because the slats retract rather than fold or roll off to one side, you get a hard-cover surface with the same open-bed convenience as a soft roll-up — pull the cover back, load anything from lumber to a full-size mattress, then slide it closed and lock it down again. It’s the style most Toyota Tundra owners choose when they don’t want to choose between security and access.
Built From
Slat Construction
Interlocking extruded-aluminum slats connect on a flexible spine, giving a rigid closed surface that still curls smoothly into the canister.
Canister Housing
A weather-sealed aluminum canister at the front of the bed houses the retracted slats and protects the mechanism from road debris.
Seals
EPDM rubber rail and tailgate seals keep rain and road spray out when the cover is closed and locked.
Hardware
Corrosion-resistant mounting hardware and a smooth-glide rail track keep the slide action consistent for years.
Confirming Your Toyota Tundra’s Fit
Bed length has to match exactly for the side rails and canister to seat correctly. This cover is built for the Toyota Tundra’s 6.5 ft bed — check your bed length on the door jamb sticker or in your owner’s manual before ordering, since the Toyota Tundra is also sold with 5.5 ft and 8.1 ft bed options depending on cab configuration.
How Installation Works
- Clean the bed rails. Wipe down the factory rail where the side tracks will mount.
- Mount the canister. Position the canister housing at the front of the bed and clamp it to the rails.
- Attach the side tracks. Run the side rail tracks back to the tailgate and clamp them down evenly.
- Feed the slat assembly. Guide the slat cover into the tracks and confirm it slides smoothly end to end.
- Test the lock. Slide the cover fully closed and confirm the tailgate lock engages before your first drive.
Specifications
Why This Cover
- Full bed access without removing the cover from the truck
- Hard aluminum slats hold up better than vinyl against punctures and UV
- Rail clamp mounting means no drilling into the F-150’s bed
- Tailgate lock keeps the cover secured when closed
- Low-profile canister keeps a clean look at the front of the bed
Frequently Asked Questions
Does this fit the 2022–2024 Toyota Tundra?
Yes, this cover is fitted for Toyota Tundra model years 2022–2024 with a 6.5 ft bed. Check your bed length on the door jamb sticker if you’re unsure which bed size your truck has.
Does the canister clear the Tundra’s factory bed utility rail system?
Yes. The canister and side tracks mount above the factory utility rail system and don’t require removing it.
Can I install this by myself?
Yes, though the canister and side tracks make this a slightly longer install than a folding or roll-up cover — most owners complete it solo in 1–2 hours.
Can I stop the cover partway open?
Yes. The slide mechanism holds its position anywhere along the track, so you can open just enough to reach what you need.
How do I maintain the slide mechanism?
Keep the side tracks clear of dirt and debris and avoid harsh solvents on the seals. Replacement seals and hardware are sold separately if either ever needs attention.
Ready to Cover Your Toyota Tundra Bed?
Full bed access, no-drill mount, hard aluminum slats — fitted to your exact truck.
Shop This Cover